DAYLIFF DS 8 submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.
DS8-10(1.5kw 2hp)
DS8-15(2.2kw 3hp)
DS8-25(4.0kw 5.5hp)
DS8-30(5.5kw 7.5hp)
DS8-37(7.5KW 10hp)
DS8-44(7.5kw 10hp)
DS8-66(11kw 15hp)
MOTOR
The pump is coupled to a sealed liquid cooled 2-pole asynchronous squirrel cage motor constructed from stainless steel. The motor requires a remote starter and if unstable supply voltage is likely, an additional quick tripping control relay is recommended. Note that due to low starting torques of submersible motors, it is recommended that DOL starters are used for all motor sizes.
Enclosure Class: IP68
Insulation Class: F
Speed:2900rpm
OPERATING CONDITIONS
Pumped Liquid: Thin, clean chemically non-aggressive liquids without solid particles or fibres.
Rated flow 8m³/h
Max. Liquid Temperature: +30°C
Max. Water Depth: 200m – 4″, 300m – 6″
Min. Borehole Diameter: 110mm – 4″ motor, 150mm-6″ motor (DS8/66 only)
There are no reviews yet.