DAYLIFF DS17


DAYLIFF DS17 submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.
DS17-7(4kw 5.5hp)
DS17-10(5.5kw 7.5hp)
DS17-13(7.5kw 10hp)
DS17-170(9.2kw 12.5hp)
DS17-20(11kw 15hp)
DS17-24(15kw 20hp)
DS17-27(15kw 20hp)

Compare

DAYLIFF DS17 submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.
DS17-7(4kw 5.5hp)
DS17-10(5.5kw 7.5hp)
DS17-13(7.5kw 10hp)
DS17-170(9.2kw 12.5hp)
DS17-20(11kw 15hp)
DS17-24(15kw 20hp)
DS17-27(15kw 20hp)

MOTOR
The pump is coupled to a sealed liquid cooled 2-pole asynchronous squirrel cage motor constructed from stainless steel. The motor requires a remote starter and if unstable supply voltage is likely, an additional quick tripping control relay is recommended. Note that due to low starting torques of submersible motors, it is recommended that DOL starters are used.
Enclosure Class: IP68
Insulation Class: F
Voltage: 3x415V
Speed: 2900rpm
OPERATING CONDITIONS
Pumped Liquid: Thin, clean chemically non-aggressive liquids without solid.
Rated flow 17m³/h
Max. Liquid Temperature: +40°C
Max. Water Depth: 300m
Min. Borehole Diameter: 150mm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DAYLIFF DS17”

There are no reviews yet.

SHOPPING CART

close
Make an Inquiry