DAYLIFF PUMP CONTROLLER S

Press Pump Controller
An in-line electronic pump controller for automatic operation of pressurised water supplies. Features include:-
Starts pump on pressure (fixed at 1.5 Bar) and stops on low flow
Dry run protection provided. Standard models require manual reset, Automatic models restart when supply returns
Incorporates a spring activated hydraulic accumulator to control pump cycling
LED power on, pump run and run dry indicators
Max Motor size: 1.1kW/1ph
Max Current: 10A
Max Operating Pressure: 10Bar
Bar Connection: 1″M
Dimensions (L/W/H): 227x130x168mm (Manual), 210x110x110 (Auto)
Protection: IP54(Auto), IP65 (Manual)

Brio Pump Controller
An in-line electronic pump controller for automatic operation that starts on pressure and stops on low flow. Features include:-
Inbuilt timer delays pump starting and controls pump cycling in low flow conditions eliminating the need for a separate pressure vessel
Dry run protection with automatic reset
LED power and run dry indicators
Built in pressure gauge
Max Motor Size: 1.5kW/1ph
Max Current: 12A
Max Operating Pressure: 10 Bar
Connection: 1″ M
Max Fluid/Ambient Temp: 55°C
Protection: IP65
Dimensions (L/W/H): 190x105x96mm
Brio Top Pump Controller
A high specification in-line electronic pump controller that starts on pressure and stops on either low flow or a settable pressure. It completely replaces the traditional pressure tank/pressure switch systems whilst providing a number of additional control features. These include:-
Simple start and stop pressure setting with digital pressure display.
Dry run protection and alternative start
Motor over current providing protection against overload and blocked water conditions.
Options of master/slave configuration in twin booster set application.
Operating/error status indicator via LED’s and display alerts.
Input and output terminals for remote connection.
Rotor anti-blocking function used to prevent seizure of mechanical parts during prolonged periods of pump inactivity.
Max. Motor Size: 2.2kW/1ph
Connection: 1″ M
Max. Stop Pressure: 10 Bar
Start Pressure Range: 0.5-8 Bar
Max. Rated Current: 16A
Protection: IP65
Max fluid / Ambient Temperature: 55°C
Dimensions (L/W/H): 225x150x115mm
Spin Flow Switch
An in-line pump controller for automatic operation by flow sensing and suitable for boosting from header tanks. Features include:-
Starts pump when flow is sensed (minimum 2.4litres/min) and stops when flow ceases
Pump stop time adjustable between 10 to 180s
System is un-pressured in no flow condition so eliminating pump cycling
Max Motor Size: 1.5kW
Max Current: 12A
Max Operating Pressure: 10 Bar
Connection: 1″M
Max Water/Ambient Temp: 50°C/55°C
Protection: IP65
Dimensions (L/W/H): 142/118/112mm
Pressure Switch
Adjustable pressure switch for pressure control of pumps featuring normally closed brass alloy contacts and tear resistant cable glands